TRACK SELECTOR GUIDE
AGCO
CHALLENGER
MT700 SERIES
348" CIRCUMFERENCE
 |
The Durabuilt 3500 series is a track for use in agricultural applications. The 3500 series offers two tread patterns with a narrow tread pitch (16", 18", and 25" widths) for hard surface applications or those requiring less compaction/ground penetration. |
 |
The Durabuilt 5500 series includes all the best features of the 3500 series and adds more rubber and more steel to meet the most demanding applications. These features include more inner surface rubber and bias layers for improved protection from carcass tearing. Also, the 5500 series offers more tread and guide lug material for increased wear life. This series of track is recommended for use in demanding agricultural applications where roading and/or side slope operations are common.
|
The 14" width is used for special purpose rowcrop work, where track width is the primary consideration. These tracks are subject to the most demanding alignment conditions and material loading, The tracks use a diagonal tread pattern to maximize the amount of tread volume for these narrow widths. Note: the tracks have directional tread pattern and are LH/RH directional. This track is only for use with the narrow width wheel package. Note: This width is not recommended for primary tillage work. If primary tillage work is also done with your machine, you should switch to 25" or 30" track for these applications .
|
SERIES |
TREADBARS |
GUIDE LUGS | CARCASS | ||||||
Part # |
# Treads | Height | Tip Width |
Pitch | # Guide | Length | Thickness | Ply Layers | |
DURABUILT™ 5500 |
|||||||||
| Camoplast | 655-1408 | 46 RH |
3.0" |
2.5" |
7.8" |
46 |
5.5"
|
37 mm |
4 |
| Camoplast | 655-1409 | 46 RH |
3.0" |
2.5" |
7.8" |
46 |
5.5" |
37 mm |
4 |