TRACK SELECTOR GUIDE
CATERPILLAR
CHALLENGER
65, 70, 75, 85, 95
TILLAGE SERIES
336" CIRCUMFERENCE
 |
The Durabuilt™ 2500 series is the general purpose track for light to medium agricultural applications. This track is intended for higher speed secondary tillage work at low to medium drawbar loads, and is a good choice for higher hour machines with limited seasonal use. The carcass and guide lug design meets the original OEM requirements, but at a more affordable price. |
 |
The Durabuilt™ 3500 series is for use in all agricultural applications. The 3500 series has similar carcass construction as the 2500 series. The 3500 series also has additional treadbar volume that results in longer track life. The wider treadbar spacing (pitch) is advantageous in areas where mud cleanout is a concern, or where additional ground penetration at a given width is needed. |
 |
The Durabuilt™ 5500 series includes all the best features of the 3500 series, plus adds more rubber and more steel to meet the most demanding applications. These features include larger main cable on all widths for increased carcass tear strength, adds substantially more inner surface protective bias and rubber, tread, and guide lug material. This track is recommended for use in both agricultural and construction applications, and is the heaviest track available in the market.
|
The 25" width is recommended for use where width restrictions are the primary consideration, and where extra treadbar penetration is desirable. This track can be used in most primary and secondary tillage operations. |
SERIES |
TREADBARS |
GUIDE LUGS | CARCASS | ||||||
Part # |
# Treads | Height | Tip Width |
Pitch | # Guide | Length | Thickness | Ply Layers | |
DURABUILT™ 2500 |
|||||||||
| Camoplast | 622-2515 | 68 |
2.0" |
2.0" |
9.9" |
36 |
5.0"
|
32 mm |
3 |
DURABUILT™ 3500 |
|||||||||
| Camoplast | 632-2505 |
68
|
2.5"
|
1.5"
|
9.9"
|
36
|
6.2"
|
36 mm
|
3
|
DURABUILT™ 5500 |
|||||||||
| Camoplast | 652-2506 | 96 |
2.5" |
1.5" |
7" |
48 |
5.0" |
46 mm |
4 |
 |
Durabuilt™ 2500 The entry level DurabuiltTM track for use in most general tillage applications. With 2" tread height and 9.9" tread pitch, this track offers a good overall balance of performance, ride, and value. |
 |
Durabuilt™ 3500 A premium track for use in any agricultural rowcrop application. With 2.5" tread height and 6.6" tread pitch, this track offers over 20% more tread, and nearly 10% thicker carcass, as compared to the Durabuilt™ 2500 series. |
  |
Durabuilt™ 5500 The Durabuilt™ 5500 is the only track recommended for use with cast slotted drivewheels, due to the aggressive nature of the non rubberized wheel design. In the 30 in width, the Durabuilt™ 5500 has 2 choices available - either the 9.9" or the 7" tread pitch, depending on your individual application requirements.
|